Things To Think About Before Ordering A Custom Adhesive

If you have made the decision to work with Britain’s 3M preferred tape convertors to procure a custom adhesive product, chances are the way you do business will never be the same again.  While it may appear to be an incredibly minor and insignificant change on the surface, switching to custom adhesives really can make a monumental difference in a variety of business areas.  Particularly in the instances of those involved in the manufacture of pretty much anything at all, working with custom adhesives can benefit the business in so many ways.

However, all of the above only becomes possible if and when the business in question works to ensure that the adhesive they purchase is fit for its intended purpose.  The beauty of ordering a custom adhesive in the first place is that it means you can have a tailored to your exact needs from the ground up.  Nevertheless, it is up to you to ensure that you take into account all necessary considerations, in order to allow for the creation of the best possible product.

So with this in mind, what follows is a brief overview of six important things to think about, before placing an order for custom adhesives for your business:

1 – Types of Materials

First up, it’s of critical importance to take into account your intentions in terms of materials to be joined.  This is important because largely every adhesive product manufactured these days is designed to work specifically with one or more materials, though will be inherently incompatible with others.  If you work with multiple materials, it may be possible to commission the creation of an adhesive product that is suitable for all or most of them.  By contrast, it may be necessary to order multiple adhesive products for each of the different materials.  As you may not personally be able to determine how many different adhesives you will need, to think carefully about materials to be joined and speak to your chosen manufacturer for advice.

2 – Bond Strength

Exactly what it is you intend to use the adhesive for will determine how strong the bond needs to be.  Just as there will always be circumstances where bonds need to be flawlessly rock-solid and immovable, other jobs call for lighter bonds.  This is something that you and only you can determine, in accordance with the needs of your business.  So be sure to take into account how strong the bond needs to be and speak to your chosen manufacturer for their own recommendations.

3 – Bond Lifespan

Something else to take into account is the permanence of the bond.  Or in other words, are you looking at the kind of bond that should remain in place permanently, or would it be better if the bond could be removed/broken further down the line?  From short-term bonds to those that must be held in place for years or even decades, pretty much anything is possible these days.  Nevertheless, it’s up to you to determine exactly what you need and to pass this information on to those you will be working with.

4 – Removal

Following along similar lines, it may be preferable to purchase and use an adhesive product that can be easily removed, without leaving a trace behind.  For example, if you intend to use the adhesive on glass though then intend to eventually remove it and continue using the same piece of glass, it is in your best interests not to use an adhesive that leaves behind the kinds of marks and residue that are impossible to remove.  Once again, these are all the kinds of things you have control over and therefore should be taking into account before placing your order.

5 – Curing Times

Something else you will have control over to a certain extent at least is the curing time of the adhesive products you purchase.  Just as some adhesives need several hours to fully dry and form a strong bond, others cure in a matter of seconds.  Exactly which is most appropriate is something that will be determined by the intended use of the adhesive, so be sure to take this into account when ordering.

6 – Health and Safety

Last up, you’ll need to think carefully about how, where and by whom the adhesive will be used, in order to evaluate it effectively in terms of health and safety.  For example, if it is inevitable that the adhesive will need to be used in the presence of open flames or extreme sources of heat, highly flammable adhesives may not be a good idea.  Likewise, if the product is to be used in a confined space minimal ventilation, those that emit extremely potent toxic fumes should probably be avoided.  Take into account all such factors and consider overall health and safety, before making your final decision.